破壁专用粉碎机：这类破壁专用粉碎机一般的质量很好不容易损坏。而日常的维修就显得比较重要。下面就是破壁专用粉碎机这类粉碎机的维护重点。
This kind of special crusher broken broken: special crusher general quality is not easy to damage. And daily maintenance is more important. Here is the focus on maintaining this kind of special crusher crusher broken.
l、检查破壁专用粉碎机轴承的润滑情况是否良好
L, check the lubrication of the bearing wall special crusher is good
2、检查所有紧同件是否紧固。
2, check all fasteners are fastened.
3、检查传动皮带是否安装正确和情况良好，若发现皮带破损应及时更换，当皮带或槽轮上有油污时，应用干净抹布及时擦净。
3, check the transmission belt is installed correctly and the situation is good, if found the belt breakage should be replaced, when the belt or groove wheel has oil, use clean cloth to wipe clean.
4、检查破壁专用粉碎机防护装置是否良好，若发现防护装置有不安全现象，应及时排除。
4, check the broken special crusher protection device is good, if it is found that the protective device is not safe, should be excluded.
5、检查破损腔内有无物料或其他杂物，若有时应清除干净。
5, check the broken cavity there is no material or other debris, if sometimes should be cleared.
6、检查破壁专用粉碎机液压起顶机顶头或起顶丝杆是否退回，调整垫片是否安装正确和压紧。
6, special mill hydraulic, check the broken top machine plug or top wire rod are returned, adjusting shim is installed correctly and pressing.